MASC
QUICK START GUIDE
Page
7
of
19
Note: all connectors going into the back of the MASC are straight. Connectors going to motors
and switches are generally right angled.
3.2.1
Power Connection
1.
Choose appropriate power lead for region e.g. UK, US
2.
Push plug into IEC socket on rear of MASC.
3.2.2
D Type Connectors
1.
Push connector into socket
2.
Rotate locking screws clockwise until finger tight
Note: it is easier to plug in the 25 way D connector for switches (if used) after plugging in the
motor and encoder connectors.
Locking Screws
