MASC
QUICK START GUIDE
Page
13
of
19
CONNECTION TO JOG BOX
If the remote jog has been purchased, then it will need to be plugged into the MASC, using the
MASC-JC-03 cable.
1.
Ensure the MASC-JB is turned off.
2.
Plug the MASC-JC-03 into the MASC-JB
3.
Screw in the locking screws until finger tight
CHECKS
1.
Check that all connections have their relevant locking mechanisms in place to prevent cables
from accidentally coming loose.
Note: Unplugging cables, in particular the motor cables, whislt the MASC is switched on can
cause damage to the MASC or device.
Locking Screws
