MASC
QUICK START GUIDE
Page
16
of
19
4.1.2 SEQUENCE MODE
The jog box can save up to four positions, on four of the configured axes. These positions can be
saved from the position mode screen and then returned to when needed.
Note: these positions are absolute from the set zero position, if you change the zero position, or
switch off the controller then the saved positions will change accordingly. It is strongly
recommended to zero each axis first and then save the positions. See section
Error! Reference s
ource not found.
for details.
4.1.2.1
Saving a Position
1.
Using the jog mode, move the device to the desired position.
Note: the speed on the slider
will be saved as the speed at which the device moves when saving the position
2.
Press the Select Axis button to navigate to the Position Mode Screen
3.
Press and hold the desired axis button until the screen changes.
4.
Select the sequence number that you wish to save using the select button. The press the set
button to save that position.
Press and hold
Select Button
Set Button
