background image

Installation, Operation and Maintenance Manual

UFO 

53

uk.ufosecurity.com

DECOMMISSIONING

Deactivating the device

The device is manufactured and constructed according to robustness, durability and flexibility 

criteria that allow it to be used for many years. Once it has reached the end of its technical 

and operational life, it must be taken out of service in such a way that it can no longer be used 

for the purposes for which it was originally designed and constructed, while still making it 

possible to reuse the raw materials that make it up.

The same decommissioning procedures must be observed in all the following cases:

- Decommissioning of the device and storage.

- Final decommissioning and subsequent disposal.

Disposal

The possibility of reusing certain parts of the device is subject to the full responsibility of the 

user.

NOTE

 

THE MANUFACTURER ASSUMES NO LIABILITY FOR PERSONAL INJURY OR PROPER-

TY DAMAGE RESULTING FROM THE RE-USE OF INDIVIDUAL PARTS OF THE DEVICE 

FOR FUNCTIONS OR IN INSTALLATION CONFIGURATIONS OTHER THAN THE ORIGI-

NAL ONES. THE MANUFACTURER REJECTS ANY RECOGNITION, IMPLICIT OR EXPLI-

CIT, OF THE FITNESS FOR A SPECIFIC PURPOSE OF DEVICE PARTS REUSED AFTER 

FINAL DECOMMISSIONING WITH A VIEW TO DISPOSAL.

NOTE

THE MANUFACTURER SHALL NOT BE LIABLE IN ANY WAY FOR ANY DAMAGE CAU-

SED BY THE DEVICE IF NOT USED IN ITS ENTIRETY AND FOR THE USES AND PURPO-

SES SPECIFIED IN THIS MANUAL.

THE MANUFACTURER IS IN NO WAY LIABLE FOR ANY DAMAGE TO PERSONS OR 

PROPERTY RESULTING FROM THE RECOVERY OF USED PARTS OF THE DEVICE 

AFTER ITS DISPOSAL.

Summary of Contents for Basic L
























































Reviews: