UFO Basic L, Installation, Operation And Maintenance Manual

Page: 18 / 55

Installation, Operation and Maintenance Manual
UFO
uk.ufosecurity.com 18
In particolare:
• It is absolutely forbidden to make any modifications to the anti-theft system. Any damage
to persons, animals or property resulting from the use of the device improperly modified by an
unauthorised operator releases the manufacturer from all liability.
• Carefully keep this manual, which is necessary for the correct and safe use of the anti-
theft system. Periodically check the condition of the label installed on the product and restore
it if it is damaged. (in case contact authorised service).
• If the external structure of one of the anti-theft system’s components has sharp edges
or corners as a result of an accidental impact, making it dangerous, you must contact
authorised service and follow their instructions.
• The access credentials for remote management of the burglar alarm system must be
carefully guarded by the owner of the system, who must never reveal them to strangers or
persons who might be intent on committing theft. White cannot be held responsible if a user
of the system loses the data for managing the anti-theft system.
• Should the user have any doubts about the secrecy of the alarm system’s access and
management data, he/she can change them by following the instructions given in the
application.
• The accessories that enable and disable the alarm system must be stored carefully and
never left lying around. Should you lose one of them, please contact customer service.
Important :
• Do not wet the electrical connections, the device and its accessories with water or other
liquids.
• The maintenance work described in the manual must be carried out.
• Maintenance must be carried out according to the instructions in the manual.
OPERATIONS INVOLVING RISKS FOR THE OPERATOR:
Observe the general accident prevention regulations during installation and commissioning
operations.
In particular:
if working on electrical parts, ensure that they are not live.
Already at the design stage, solutions were adopted to make the device safe in all phases
of use: transport, assembly, adjustment, operation and maintenance. Nonetheless, not
all possible risks for operators and the environment have been eliminated, either for
technological reasons (reliability of the devices) or for management reasons (excessive
difficulty in eliminating them), consequently the residual risks present are reported.