UFO Basic L, Installation, Operation And Maintenance Manual

Page: 24 / 55

Installation, Operation and Maintenance Manual
UFO
uk.ufosecurity.com 24
LOCATIONS
A few aspects should be borne in mind before proceeding with the handling,
installation and subsequent use of the device. In particular, certain factors must
be verified:
•
The area of use and storage of the anti-theft device and its accessories
must be chosen so that it cannot be affected by water, steam jets and corrosive
acids. They must never be exposed to the weather.
•
The fog device must be positioned at a height of between 1.80 metres and
2.20 metres.
•
The Pir sensor has a detection angle of 90 degrees, so the fog generator
should not be placed in a corner with a width of less than 90 degrees.
•
There must be a free space of at least 4 metres in front of the sensor.
•
The sensor must not point perpendicularly at reflective surfaces (e.g. glass,
mirrors, screens...) or heat sources (e.g. refrigerators, heating...).
•
Storage temperature range -10 °C to +55 °C
•
The device may only be used indoors.
MOVING
The weight of the device is given in this manual. Due to its size and weight, it
can be moved manually by a single person.