UFO Basic L, Installation, Operation And Maintenance Manual

Page: 43 / 55

Installation, Operation and Maintenance Manual
UFO
43 uk.ufosecurity.com
STEP 1 STEP 2 STEP 3 STEP 4
The new sensor will appear under ‘Accessories’. It will be set to Total zone and
Off as default configuration. If you wish to activate the sensor, click on ‘Off/On’
in the bottom left corner.
The sensor is active when On is green.
By pressing on the 3 dots on the right, for each sensor you can the details,
change the sensor zone or delete it.
If the sensor details are not loaded correctly, try sending a command from the
sensor to disarm (e.g. disarm button from the remote control, open the contact
of the magnet or move in front of the volumetric Pir).
In the details, you will be able to see the last command sent, the battery charge
and the quality of its connection to the UFO.
STEP 1 STEP 2 STEP 3 STEP 4