u-blox JODY-W2, System Integration Manual

Page: 84 / 84

JODY-W2 - System integration manual
UBX-18068879 - R14 Revision history Page 84 of 84
C1 - Public
Revision history
Revision Date Name Comments
R01 10-Apr-2019 lber, aheg, mzes Initial release.
R02 02-May-2019 kgom Changed product status for JODY-W263-01A-00 to Prototype.
R03 21-May-2019 lber Updated JODY-W2 module pin definition.
R04 03-Sep-2019 aheg Added information about loading calibration data.
R05 05-May-2020 lber, aheg, mzes Verification and update of the document with respect to different
hardware and software features.
R06 25-Jun-2020 aheg Fixed the command to download Bluetooth firmware using fw_loader with
3 MHz baud rate. Resolved some minor discrepancies between the
datasheet and integration manual.
R07 7-Dec-2020 lber Added references [12] and [13]. Removed antenna pins 2 and 3 from
Figure 2 and updated Figure 7 to reflect latest antenna layout. Added
antenna reference design to related documents.
R08 11-Dec-2020 mzes Corrected product name and chipset references in document information
and section 1.1.1.
R09 29-Jan-2021 aheg, lber Revised Wi-Fi power states in Table 3, added power-up sequence diagram
in section 1.3.1, configuration of Wi-Fi transmit power limits in section 3.7,
and Rate group information for one spatial stream in Table 29. Included
sleep mode configuration commands in section 3.11.10.
R10 26-Aug-2021 lber Updated reference design schematic in Figure 15.
R11 25-Jan-2022 lber, mzes Internal PU/PD added in Table 8 in Configuration pins . Updated Bluetooth
to version 5.2. Added open-source and MCUXpresso in Available software
packages . Updated Handling and soldering and Product testing chapters.
R12 06-May-2022 mzes Updated regulatory output power limits for 2.4 GHz, 40 MHz in Table 38
and Table 42 according to certification reports.
R13 05-Oct-2022 sebs, mzes, lber Added JODY-W263-10B variant. Updated Configuration control and
software security of end-products . Added Wi-Fi Tx output power limits for
Japan (Giteki), Korea (KCC), and Taiwan (NCC) regulatory domains.
Updated host wake-up signals in
Table 6 . Clarified the Power-up sequence .
Added thermal characterization parameter in Thermal guidelines . Updated
contact information.
R14 05-Jun-2023 mzes Updated Open-source Linux/Android drivers . Moved ESD specification for
HBM and CDM to the data sheet. Added NCC Wi-Fi Tx output power limits
for 5 GHz, VHT80. Updated RF transmission line design recommendations
and contact information. Restructured Regulatory compliance section with
rationalized content moved from the data sheet.
Contact
u-blox AG
Address: Zürcherstrasse 68
8800 Thalwil
Switzerland
For further support and contact information, visit us at www.u-blox.com/support .