JODY-W2 - System integration manual
UBX-18068879 - R14
Regulatory compliance
Page 71 of 84
C1 - Public
5.6
Japan radio equipment compliance
Compliance statement
JODY-W2 series modules comply with the Japanese Technical Regulation Conformity Certification
of Specified Radio Equipment (ordinance of MPT N°. 37, 1981), Article 2, Paragraph 1:
•
Item 19 "2.4 GHz band wide band low power data communication system"
•
Item 19-
3 “Low
power data communications system in the 5.2/5.3 GHz band”
•
Item 19-3-
2 “Low power data communications system in the 5.6 GHz band”
The JODY-W2 module is restricted on the Japanese market to be used indoors only if the product is
operating in the 5.2/5.3 GHz band.
shows the Giteki certification IDs allocated to JODY-W2 modules.
Model
Giteki ID
JODY-W263-00A, JODY-W263-01A, JODY-W263-00B MIC ID:
R
003-210312, MIC ID:
T
D210214003
Table 35: Giteki IDs for different variants of JODY-W2 modules
End product labelling requirement
End products based on JODY-W2 series modules and targeted for distribution in Japan must be
affixed with a label with the
“Giteki” marking, as shown in
The “Indoor use only” information
translated into Japanese below is mandatory if the product is operating in the 5.2/5.3 GHz band. The
marking must be visible for inspection.
003-210312
D210214003
この製品は屋内においてのみ使用可能です
Figure 20: Giteki R and T marks with the JODY-W2 MIC certification numbers
5.7
KCC South Korea compliance
JODY-W2 series modules are certified by the Korea Communications Commission (KCC).
shows the KCC certification IDs allocated to JODY-W2 modules.
Model
KCC ID
JODY-W263-00A, JODY-W263-01A, JODY-W263-00B,
JODY-W263-10B
R-C-ULX-JODY-W263-01A
Table 36: KCC certification IDs for different variants of JODY-W2 modules
End products based on JODY-W2 series modules and targeted for distribution in South Korea must
carry labels containing the KCC logo and certification number, as shown in
This information
must also be included in the product user manuals.
R-C-ULX-JODY-W263-01A
Figure 21: KCC marks with the JODY-W2 KCC certification numbers
☞
The height of the KCC logo must be at least 5 mm.
