TZS First AUSTRIA FA-5628-8, Instruction Manual

Page: 2 / 32

DESCRIPTION OF PARTS
(see fig. 1)
Notes:
• Some parts of the iron have been slightly greased and as result the iron may smoke slightly
when switched on for the first time. It will not happen again after a few uses.
• Before using for the first time, remove any protective films or stickers from the sole plate and the
cabinet. Then clean the sole plate with a soft cloth.
• When using the iron for the first time, test it on an old piece of fabric to ensure that the sole
plate and water tank are completely clean.
3
ENGLISH
2
ENGLISH
INSTRUCTION MANUAL
IMPORTANT SAFEGUARDS
• Disconnect the iron from the wall outlet for
filling in water or when you remove the water
after use.
• The iron must be used and resetted on a stable
surface.
• When placing the iron on its stand, ensure that
the surface on which the stand is placed is
stable.
• The iron can not be used if it has been dropped,
causing visible signs of damage and leaking.
• This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities, or lack
of experience and knowledge, unless they
have been given supervision or instruction
concerning use of the appliance by a person
responsible for their safety.
• This appliance can be used by children aged
from 8 years and persons with reduced physical,
sensory or mental capabilities, or lack of
experience and knowledge, if they have been
given supervision or instruction concerning use
of the appliance in a safe way and understand
the hazards involved. Children should not
play with the appliance. Cleaning and user
maintenance shall not be made by children
without supervision.
• Keep the iron and its cord out of the reach of
children less than 8 years of age when it is
energized or cooling down.
• The iron must not be left unattended while it is
connected to the supply mains.
CAUTION: the surface is liable to get hot
during use!
• Please read all instructions carefully before using the appliance for the first time.
• Before connecting the appliance, check if the voltage indicated on the rating plate corresponds
with the mains voltage in your home.
• Do not use appliance for other than intended use.
• The iron should always be switched off before connecting or disconnecting from the power
supply. Do not pull on the cord to disconnect the plug from the wall socket.
• Do not use the iron when it is damaged in any way. Do not operate the iron with a damaged
cord or plug. Do not replace the power cord or any other parts by yourself. Bring the iron to
the nearest authorized service facility or to the shop where you bought it, as special tools are
required for repair.
• When you have finished ironing or when you only leave it for a short while:
- turn the steam control knob to position “Ø”,
- stand the iron upright,
- disconnect the iron from the wall outlet.
• Do not allow children to touch the iron or the power cord when ironing.
• Do not immerse the iron or the cord into water or any other liquid.
• Do not touch hot metal parts, hot water or steam. These parts become hot and may cause burns.
Take care if you turn the iron upside down: there may be hot water in the tank.
• The plug and cord should not be allowed to touch the hot sole plate. Let the iron cool down
completely before taking it away. Roll the power cord around the iron for storage
• To avoid an overloaded circuit, do not operate another high voltage appliance in the same electric
circuit.
• Never use an extension power cord set that is not approved by a competent authority. The cord
should be rated for 10A (Europe) or 15A (America), cords rated for less amperage may overheat.
The cord should be arranged in a way that it cannot be pulled or tripped over.
• The iron is for household use only.
SAVE THE INSTRUCTION MANUAL FOR FUTURE REFERENCE.
1. Spray Button
2. Burst of Steam Button
3. Steam Control Knob
4. Water Fill Opening
5. Spray Nozzle
6. Max. Water Level
7. Soleplate
8. Temperature Dial
9. Water Tank
10. Ready Light
11. Self Cleaning Button