Document No: LT0117
F4000 LCD Operator's Manual
Interpreting The Display
Issue 2.38
19 April 2002
Page 4-7
4.3.9 "NORMAL" LED INDICATOR (NZ PANELS ONLY)
A Green indicator interpreted as:
(a)
ON
The normal state
(b)
F
The F4000 is Normal, but the mains supply is off.
(c)
OFF
An un-isolated alarm or fault condition exists. In this case the appropriate
FIRE or DEFECT indicator will be on flashing,
or
An abnormal condition exists, e.g. Processing Stopped, System Fault or
EEPROM Write Enabled.
4.3.10 "FIRE" LED INDICATOR (NZ PANELS ONLY)
A Red indicator interpreted as:
(a)
OFF
The normal state
(b)
F
One or more un-isolated MAF zones is in alarm
Master Alarm relay is activated, due to zone alarms or a Latched Battery Very
Low (NZ mode).
4.3.11 "DEFECT" LED INDICATOR (NZ PANELS ONLY)
An Amber indicator interpreted as:
(a)
OFF
The normal state
(b)
F
One or more un-isolated MAF zones is in Fault
A communications fault exists
The External Silence Alarms input is active at the FIP or an RZDU.
Battery low during test
Internal test failure
Processing has been disabled
