F4000 LCD Operator's Manual
Document No: LT0117
System Specifications
Page 3-2
19 April 2002
Issue 2.38
3.1 SYSTEM
CAPACITY
Input Circuits
- Up to 508
Circuit Detector Load
- 2.5mA for Active EOL (FP0472 ADR)
(MAX)
- 4.0mA for Active EOL (FP0523 ADR)
- 4.0mA for Active EOL (FP0755 ADR-M)
- 120
µ
A for Passive 39K EOL
Display Zones
- Up to 528
Input to Zone Map
- Freely Programmable
Control Outputs
- Up to 508 plus Master Ancillary Relay
Maximum Responders
- 127
Remote Display Units
- Up to 8 (additional mimics allowed)
Maximum Zones per Unit
- 64-192 in 19" cabinets (256 in Extender)
Other Inputs
- Supervised MCP on cabinet (not large 19" cabinets)
FIP Relays
- Master Alarm (MAF) (2 OFF), Fault, Standby,
Isolate, Bells, Ancillary
Relay Ratings
- FIP: 2A at 30 VDC
RRM: 1A at 30 VDC
Serial Port
- Programmer Terminal/Printer
Serial Port Protocol
- XON/OFF 300,1200,9600 baud, 8 bits, no parity
Other Ports
- RZDU, Spare and Network
Port Protection
- All to AS1603.4 1987 Admt 1 & 2
Communications Loop
- 4 Wire (24 VDC, 0 VDC, TX, RX)
- O/C and S/C Fault Tolerant
Alarm Response Time
- 3.8 seconds MAX (127 Logical Responders)
History Log
- 900 events
Printer Buffer
- 170 events
Mimic Driver
- ALARM LEDs
