Document No: LT0117
F4000 LCD Operator's Manual
Introduction
Issue 2.38
19 April 2002
Page 1-3
SCOPE (CONTINUED)
Chapter 9:
Placing Into Operation;
A description of how to place a correctly aligned
and adjusted system into operation. Also included is a System
Commissioning Checklist.
Chapter 10:
Maintenance and Trouble-Shooting;
A guide on system maintenance
procedures and trouble-shooting.
Appendix A:
Responder Compatible Actuating Devices;
A list of compatible actuating
devices and detectors for the F4000 FIP.
Appendix B:
Compatible Batteries;
A list of compatible batteries.
Appendix C:
FFCIF Type 2 Fire Fighters Guide
; For use when the FIP is programmed for
FFCIF Type 2 operation.
1.2 ATTACHMENTS
A FIRE FIGHTER'S GUIDE is fixed inside the front cover for quick reference in
emergencies.
If the F4000 FFCIF is configured for Type 2 operation, i.e. global acknowledgement, reset
and isolation of zones in alarm, refer to Appendix C for instructions on ensuring that the
correct Fire Fighters Guide is used.
Your installation company should install the following documents inside the panel:
(a)
An "AS INSTALLED" fire detection system diagram and/or summary, describing the
installed layout of your F4000 System.
(b)
Other "AS INSTALLED" information, such as System configuration parameters.
(c)
A Maintenance Log-Book.
