3. Programming
54
D-306488 WK250 Installer’s Guide
3.7 PGM Output
3.7.1 General Guidance
The "
05:OUTPUTS
" menu enables you to select events/conditions under which the PGM (programmable) output
will function and to select the internal sounder or STROBE light (that will be activated according to system
programming).
3.7.2 Open Collector States
The WP provides an open collector output (active low) for control:
ON state (pulled to ground) = 0
OFF state:
no pullup = float
with pullup to Vcc = 1
3.7.3 PGM Output Configuration
05:OUTPUS
⋅⋅⋅
PGM OUTPUTS
PGM DEVICE 01
⋅⋅⋅
MENU you wish
Enter "
PGM DEVICE 01
" and select the menu you wish to configure (see guidance above and in section 3.2).
Define which factors, including any combination of factors that will determine the PGM output.
Option and default
Configuration Instructions
PGM: BY ARM AWAY
disable
Activates the PGM output upon arming
Away
.
Options:
disable; turn ON; turn OFF
and
activate PULSE
.
PGM: BY ARM HOME
disable
Activates the PGM output upon arming
Home
.
Options:
disable; turn ON; turn OFF
and
activate PULSE
.
PGM: BY DISARM
disable
Activates the PGM output upon arming
Disarm
.
Options:
disable; turn ON; turn OFF
and
activate PULSE
.
PGM: BY MEMORY
disable
Activates the PGM output upon registration of an alarm in the memory. The output will
restore to normal upon memory clearing.
Options:
disable; turn ON; turn OFF
and
activate PULSE
.
Note:
In Soak Test mode and when BY MEMORY is enabled, the PGM will not
be activated.
PGM: BY DELAY
disable
Activates the PGM output during the
Exit and Entry
delays.
Options:
disable
;
turn ON
;
turn OFF
and
activate
PULSE
.
PGM: BY KEYFOB
disable
Activates the PGM output upon pressing the AUX (
) button of keyfob transmitters
configured to activate the PGM output. For further details, refer to the configuration
instructions of the AUX (
) button of the respective keyfobs' datasheets.
Options:
disable; turn ON; turn OFF; activate PULSE
and
toggle