3. Programming
48
D-306488 WK250 Installer’s Guide
Option and default
Configuration Instructions
Send 2wv code
disable
Monitoring Station (to turn the Monitoring Station from data communication to voice
communication state) by using pre-selected SIA or Contact-ID communication format
only.
voice c.s.:
Select the timeout for 2-way voice communication with Monitoring
Stations, or enable the Monitoring Station to ring back for 2-way voice function. This
option is applicable only after reporting an event to the Monitoring Station for listening
and speaking.
ringback Time:
Define the period during which the Monitoring Station can establish
2-way voice communication with the control panel (after 1 ring), if:
A. Alarm type message was received by Monitoring Station.
B. Ring Back function was selected (see “Voice <--> C.S.” sub menu above).
Ambient Level:
Select the ambient noise level of the installation. If it is a relatively
noisy environment, set it to High (default setting). If it is a very quiet environment, set
to Low.
voice<- ->cs
disable
ringback time
1 minute
ambient level
low
(Return)
Master Installer only for:
Send 2wv code /
voice <
−
−
>cs /
ringback time
Send 2wv code
disable
Options:
disable
; and
enable
.
voice<- ->cs
disable
Options:
disable
;
timeout 10/45/60/90s
;
timeout 2m
; and
ringback
.
Note:
If "
ring back
" is selected, you should select "disable report" for private
telephone (see Option "
01: REPORT EVENTS
"), otherwise the Monitoring Station will
establish communication with the control panel (after an event occurrence) in the
normal manner (and not after one ring).
Ringback time
1 minute
Options:
1
/
3
/
5
/
10 minute(s)
.
ambient level
low
Options:
low
and
high
.
66:24h ZONE RPRT
both burglary
Define whether 24 hour (silent and audible) zones will function as normal 24 hour
zones or as panic zones.
Applicable in UK only
Options:
audible as panic
;
silent as panic
;
both as panic
; and
both burglary
.