3. Programming
10
D-306488 WK250 Installer’s Guide
3. Programming
3.1 General Guidance
This chapter explains the Installer programming (configuration) options of your WK250 device and how to customize its
operation to
your particular needs end user requirements.
The alarm system includes a partition feature. Partitioning allows you to have up to three independently controllable
areas with different user codes assigned to each partition. A partition can be armed or disarmed regardless of the status
of the other partitions within the system.
The Soak Test feature allows selected zones to be tested for a pre-defined period of time. When in Soak Test mode,
activating a zone does not cause an alarm and siren and strobe are not activated. The zone activation is recorded in the
event log and is not reported to the Monitoring Station. The zone remains in Soak Test until the pre-defined period of time for
the Soak Test has elapsed without any alarm activation.
The zone then automatically removes itself from Soak Test mode.
3.1.1 Navigation
The keypad's buttons are used for various functions when programming. The following table provides a detailed
description of the function or use of each button.
Button
Definition
Navigation / Setting Function
NEXT
Use to
move / scroll forward
to the next menu options.
BACK
Use to
move / scroll backward
to the previous menu options.
OK
Use to
select a menu option
or to
confirm a setting or action
.
Escape
Use to
move one level up
in the menu or to
return to previous
setting step
.
Delete / abort
Use to
edit
a field or
jump back
to the [
<OK> TO EXIT
] screen to quit
programming.
-
Numerical keypad used to enter alphanumerical data.
Partition selection
Use to change the status of
partitions
when programming user codes
3.1.2 Feedback Sounds
The sounds you will hear while using and configuring the keypad are:
Sound
Definition
Single beep, heard whenever a key is pressed
Double beep, indicates automatic return to the normal operating mode (by timeout).
Three beeps, indicates a trouble event
♫
Happy Tune
(- - - –––), indicates successful completion of an operation.
♫
Sad Tune
(–––––), indicates a wrong move or rejection
You can control the volume level of the sounded beeps by pressing the
button on the keypad to increase the
volume of the beeps heard, or by pressing the
button to decrease the volume of the beeps heard.
3.2 Entering the "Installer Mode" and Selecting a Menu Option
All installer menu options can be accessed via the
"Installer Mode"
on the WK250 keypad which is one of the main
system menu options. The display on the keypad is on two rows.
To enter the
"Installer Mode"
and select an Installer Menu Option proceed as follows: