Air Tools TERMI-POINT
(diverse types)
©2013 Tyco Electronics AMP GmbH, a TE Connectivity company.
All rights reserved.
TE Connectivity, TE connectivity (logo), TERMI-POINT and Tyco
Electronics are Trademarks.
30/ 64
Customer Manual
412-18008 Rev. D1
* Other products, logos and company names mentioned herein may be trademarks of their respective owners
10.1.2 Tool Check (weekly)
1.
Ensure that all holding screws are tight (Fig. 15).
Fig. 15: Holding Screws Check
2.
Remove insulation strippings once a day (Fig. 16).
Fig. 16: Removal of Container
3.
Remove (section 6.5 “”Removal of Mandrel“).
Ensure that passageway for insulation strippings is clear.
Check mandrel and clip guide anvil for burrs or nicks (Fig. 17).
Fig. 17: Mandrel & Clip Guide Anvil Check
