TWERD Power Electronics MFC710 400V Series, User Manual

Page: 50 / 98

Section 7. Sets of factory parameters
7. Sets of factory parameters
The way of loading factory parameters in the converter is shown in section 3.7. There are 9 various sets of
factory parameters (table 7.1) intended for loading standard, most used control programs.
Frequently in the beginning it is better to load one of the instanced standard sets of parameters, than manually
change a lot of parameters of the frequency converter. After loading factory settings it is necessary to change only those
options which should be changed to adapt operation of the converter for specific conditions.
It is important to remember that after loading any set of factory parameters, it is necessary to define factory
parameters of the connected motor and in case of using vector mode to carry out motor identification (see
section 4.1 and 5.1).
Table 7.1 - Sets of factory parameters
Parameter
№
1
Base
2
Remote
3
Local/
Remote
4
PID
5
Motopotenti
o-meter
6
Constant
Frequency
7
Regulated
torque
8
Pumps
9
Winding
1.20 U/f lin. U/f lin. U/f lin. U/f lin. U/f lin. U/f lin. Vector 1 U/f lin. Vector 1
1.65 Reverse Reverse Reverse Reverse Reverse Reverse Reverse Right Reverse
2.1 Sw.Off Sw.On In.C3 In.C3 Sw.Off Sw.Off Sw.Off Sw.Off Sw.Off
2.2 Keyb.r Keyb.r Keyb.r OutPID MotPot Keyb.r 100.0% OutPID 100.0%
2.3 In.A0 In.A0 In.A0 In.A0 Keyb.r In.A0 In.A0 In.A0 In.A0
2.4 Keyb. Keyb. Keyb. Dig.In Dig.In Keyb. Keyb. Keyb. Keyb.
2.5 Dig.In Dig.In Dig.In Dig.In Keyb. Dig.In Dig.In Dig.In Dig.In
2.6 Keyb. Keyb. Keyb. Keyb. Dig.In Keyb. Keyb. Keyb. Keyb.
2.7 Dig.In Dig.In Dig.In Dig.In Keyb. Dig.In Dig.In Dig.In Dig.In
2.9 100.0% 100.0% 100.0% 100.0% 100.0% 100.0% Ref.A0 100.0% Ref.RC
2.10 100.0% 100.0% 100.0% 100.0% 100.0% 100.0% Ref.A0 100.0% Ref.A1
2.20 Sw.Off Sw.Off Sw.Off Sw.Off In.C6 Sw.Off Sw.Off Sw.Off Sw.Off
2.21 Sw.Off Sw.Off Sw.Off Sw.Off In.C5 Sw.Off Sw.Off Sw.Off Sw.Off
2.22 1 1 1 1 0 1 1 1 1
2.23 10.0 s 10.0 s 10.0 s 10.0 s 5.0 s 10.0 s 10.0 s 10.0 s 10.0 s
2.30 In.C5 In.C5 In.C5 Sw.Off Sw.Off In.C4 In.C4 In.C5 Sw.Off
2.31 In.C6 In.C6 In.C6 Sw.Off Sw.Off In.C5 In.C5 In.C6 Sw.Off
2.32 Sw.Off Sw.Off Sw.Off Sw.Off Sw.Off In.C6 In.C6 Sw.Off Sw.Off
2.68 2 2 2 0 2 2 2 1 2
2.70 0 s 0 s 0 s 0 s 0 s 0 s 0 s 60 s 0 s
3.10 In.C3 In.C3 Sw.Off Sw.Off In.C3 Sw.Off Sw.Off Sw.Off Sw.Off
3.70 In.C4 In.C4 In.C4 In.C4 In.C4 Sw.Off Sw.Off Sw.Off Sw.Off
4.10 Par. 0.11 Par. 0.11 Par. 0.11 Par. 0.31 Par. 0.11 Par. 0.11 Par. 0.11 Par. 0.11 Par. 0.11
4.11 Par. 0.5 Par. 0.5 Par. 0.5 Par. 0.30 Par. 0.5 Par. 0.5 Par. 0.5 Par. 0.34 Par. 0.5
4.12 Par. 0.4 Par. 0.4 Par. 0.4 Par. 0.31 Par. 0.4 Par. 0.4 Par. 0.4 Par. 0.4 Par. 0.4
4.13 Par. 0.7 Par. 0.7 Par. 0.7 Par. 0.2 Par. 0.7 Par. 0.7 Par. 0.7 Par. 0.34 Par. 0.7
4.14 Par. 0.1 Par. 0.1 Par. 0.1 Par. 0.30 Par. 0.1 Par. 0.1 Par. 0.1 Par. 0.1 Par. 0.1
4.15 Par. 0.2 Par. 0.2 Par. 0.2 Par. 0.4 Par. 0.2 Par. 0.2 Par. 0.2 Par. 0.2 Par. 0.2
4.16 Par. 0.3 Par. 0.3 Par. 0.3 Par. 0.6 Par. 0.3 Par. 0.3 Par. 0.3 Par. 0.3 Par. 0.3
4.17 Par. 0.4 Par. 0.4 Par. 0.4 Par. 0.7 Par. 0.4 Par. 0.4 Par. 0.4 Par. 0.4 Par. 0.4
4.18 Par. 0.5 Par. 0.5 Par. 0.5 Par. 0.8 Par. 0.5 Par. 0.5 Par. 0.5 Par. 0.5 Par. 0.5
4.19 Par. 0.6 Par. 0.6 Par. 0.6 Par. 0.10 Par. 0.6 Par. 0.6 Par. 0.6 Par. 0.6 Par. 0.6
4.20 Par. 0.7 Par. 0.7 Par. 0.7 Par. 0.20 Par. 0.7 Par. 0.7 Par. 0.7 Par. 0.7 Par. 0.7
5.1 Ref.A0 Ref.A0 Ref.A0 Ref.A0 Ref.A0 Ref.A0 Ref.A0 Ref.A0 Ref.A0
5.10 NO NO NO NO NO NO NO YES NO
5.27 Ref.A0 Ref.A0 Ref.A0 Ref.A0 Ref.A0 Ref.A0 Ref.A0 RefPID Ref.A0
50
Frequency converter MFC710 type. TWERD Power Electronics