46
Display Aspect Ratio
- This allows you to change the Aspect Ratio of the outgoing
signal on the Output of the matrix. There is also a setting to change the Aspect Ratio on
the Inputs of the matrix and can be used in conjunction with the Output settings. Click on
the dropdown menu and select the required Aspect Ratio. Click on ‘
OK
’ at the bottom of
the Output Settings window and the new Aspect Ratio will be implemented.
Display Aspect Ratio
– Because set resolutions change the way the Video signals are
handled, this feature allows you to lock the Aspect Ratio irrespective of the Output
resolution that has been set.
Audio
– This section gives you the ability to individually manage the Audio on each
output. The options are:
Off
(default) no audio on the Output;
AFV
Audio Follow Video,
the Output will embed the audio that has been assigned to or embedded on the Input
source;
Breakaway
you can assign four of the eight AES stereo Input channels or any
embedded audio source to the four stereo Output channels and can be in any order but
must be from the same source.
AFV
– ‘Audio Follow Video’ mode means whatever video source is being viewed on a
specific Output its associated audio will be selected. This can be the audio from any
source, either an embedded audio stream from an HDMI Input or a separate AES3
channel. It is possible to assign and embed analog audio onto any video input using one
of TVOne’s compatible A2-7300 range of audio Breakout units.
