41
Audio Configuration Section
The fourth section of the ‘Input Settings’ window allows you to configure and manage the
audio associated with a specific input.
Audio
– This indicates whether there is an embedded audio signal detected. It shows
‘
Present
’ if there is audio and ‘
Not
Present
’ if there is no signal detected.
Visible in Audio Matrix
– This feature allows you to make non-audio embedded video
sources viewable in the Audio Matrix. This may be useful when a connection between an
input and an output is required prior to having audio channels embedded into the video
stream. SDI sources are not automatically added to the Audio View Matrix so should be
added manually with this function if you require them.
Please note:
Aliases should be set prior to making inputs visible in the Audio Matrix.
Monitor Audio Bars
- When a Monitor Module is installed, this feature allows you to turn
on Audio Monitoring Bars on inputs that have embedded audio. The system monitors the
embedded audio and gives a visual representation of signal level on each channel. The
Audio Bars can be activated on specific input thumbnails viewable on the output of the
Monitor Module.
Audio Follow Video Selection
– This allows you to assign any available audio signal to
any video source including: existing audio embedded HDMI sources; analog RGBHV,
YUV, YC and CV; and non-embedded digital video sources. The assigned audio
channels may be from an embedded HDMI source or separate analog or digital signals
via AES inputs from one of TVOne’s compatible A2-7300 range of audio breakout units.
