Operation
g271157
Figure 11
1.
Caster pin locking mechanism
Before Operation
Before Operation Safety
•
Evaluate the terrain to determine what accessories
and attachments are needed to properly and
safely perform the job. Only use accessories and
attachments approved by Z Turf Equipment.
•
Inspect the area where the machine is to be
used and remove all rocks, toys, sticks, wires,
bones, and other foreign objects. These can be
contaminated by chemicals, thrown, or interfere
with the operation of the machine and may cause
personal injury to the operator or bystanders.
•
This machine was designed for one operator only.
Do Not carry passengers.
•
Wear appropriate personal protective equipment
such as safety glasses, long pants, substantial
slip-resistant footwear, and hearing protection.
Tie back long hair and avoid loose clothing and
loose jewelry which may get tangled in moving
parts.
•
This machine produces sound levels in excess of
85 dBA at the operator’s ear and can cause hearing
loss through extended periods of exposure. Wear
hearing protection when operating this machine.
•
Check that the following items are in place and in
proper working condition: the operator presence
controls, safety switches, guards, and shields. Do
Not operate the machine unless they are in proper
working condition. Replace worn or deteriorated
parts with genuine Z Turf Equipment parts when
necessary.
DANGER
It is essential that operator safety mechanisms
be connected and in proper operating
condition prior to use.
Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position. When the key is turned
to the “OFF” position, the engine should
shut off. If not, stop using the machine
immediately and contact an Authorized
Service Dealer.
•
Do Not operate the machine when people,
especially children, or pets are in the area. Shut
off the machine and attachment(s) if anyone
enters the area.
•
Do Not operate the machine without the safety
devices in place and in proper working condition.
Components are subject to wear, damage and
deterioration, which could expose moving parts
or allow objects to be thrown. Frequently check
for worn or deteriorating components and replace
them with the manufacturer’s recommended parts
when necessary.
•
Do Not fill, calibrate, or clean the machine when
people, especially children, or pets are in the area.
•
Check all sprayer components for wear and leaks
before applying pressure to the system. Do Not
use if leaking or damaged.
•
Make sure the operator platform is clean and free
from chemical residue and debris buildup.
20
Summary of Contents for Z-SPRAY JUNIOR Series
