Operation
Product Overview
g315147
Figure 3
1.
Motion control levers
5.
Hopper
2.
Engine/Spreader–Sprayer
Controls
6.
Spread impeller
3.
Spray wand
7.
Nozzles
4.
Fuel cap
8.
Spray tank
Operation
Note:
Determine the left and right sides of the
machine from the normal operating position.
Controls
Become familiar with all the controls before starting
the engine and operating the machine.
Motion Control Levers
The motion control levers, located on each side of the
top console, control the forward and reverse motion
of the machine.
Moving the levers forward or backward turns
the wheel on the same side forward or reverse
respectively. Wheel speed is proportional to the
amount the lever is moved.
g316796
Figure 4
1.
LH Motion control lever
5.
Forward
2.
RH Motion control lever
6.
Neutral
3.
Front reference/Speed
control bar
7.
Reverse
4.
Front of the machine
Choke Control
Located in the center of the control console (see
Figure 5).
The choke is used to aid in starting a cold engine.
Pulling up on the choke will put the choke in the
“ON” position and pushing down on the choke will
15
Summary of Contents for Z-SPRAY JUNIOR Series
