Maintenance
Recommended Maintenance Schedule(s)
Maintenance Service
Interval
Maintenance Procedure
After the first 5 hours
• Change the engine oil.
After the first 100 hours
• Change hydraulic system filter and fluid
• Check the wheel hub slotted nut torque specification.
Before each use or daily
• Check the engine oil level.
• Check for loose hardware.
• Check air cleaner; replace if dirty. (May need more often under severe conditions.)
• Check fuel strainer, filter, and tank.
• Clean the engine and exhaust system area.
• Clean the debris build-up from the machine.
Every 40 hours
• Check the hydraulic system fittings.
• Check the condition of belt.
Every 50 hours
• Check the tire pressures.
• Check spreader system.
• Check sprayer system.
Every 80 hours
• Remove engine shrouds and clean cooling fins.
Every 100 hours
• Replace the dual element air cleaner element.
• Change the engine oil. (May need more often under severe conditions.)
• Grease caster pivots (2x).
• Grease idler pivot.
• Check the spark plugs.
Every 500 hours
• Change hydraulic system filter and fluid (Every 250 hours/Yearly if using Mobil 1 15W50)
• Check the wheel hub slotted nut torque specification.
Monthly
• Check the battery charge.
42
Summary of Contents for Z-SPRAY JUNIOR Series
