Operation
slope and the ramps extends up the slope. This will
minimize the ramp angle. The trailer or truck should
be as level as possible.
Important:
Do Not attempt to turn the machine
while on the ramp, you may lose control and
drive off the side.
Avoid sudden acceleration when driving up a ramp
and sudden deceleration when backing down a
ramp. Both maneuvers can cause the machine to tip
backward.
WARNING
Loading a machine on a trailer or truck increases
the possibility of backward tip-over. Backward
tip-over could cause serious injury or death.
•
Use extreme caution when operating a
machine on a ramp.
•
Use only a single, full width ramp; Do Not use
individual ramps for each side of the machine.
•
If individual ramps must be used, use enough
ramps to create an unbroken ramp surface
wider than the machine.
•
Avoid sudden acceleration while driving
machine up a ramp to avoid tipping backward.
•
Avoid sudden deceleration while backing
machine down a ramp to avoid tipping
backward.
40
Summary of Contents for Z-SPRAY JUNIOR Series
