manualshive.com logo in svg

turck TBEN-L 8IOL Series, Instructions For Use Manual, Page: 45 / 148

Share
Download
turck TBEN-L 8IOL Series Instructions For Use Manual Download Page 45

V02.00 | 2019/10

45

8.7

Connecting the device to a Siemens PLC in PROFINET

The following example describes the connection of the devices to a Siemens PLC in PROFINET
by means of the programming software SIMATIC STEP7 Professional V15 (TIA-Portal).

Used Hardware

The following hardware components are used in this example:

n

Siemens PLC S7-1500

n

IO-Link master TBEN-L5-8IOL with the following configuration:

– Port 1: Turck temperature sensor, TS-530-LI2UPN8X-..., IO-Link V1.0
– Port 2: Channel used as DI
– Port 3: Turck linear position sensor, Li100P0-Q25LM0-..., IO-Link V1.0
– Port 4: Channel used as DI
– Port 5: Channel used as DI
– Port 6: Turck IO-Link hub: TBIL-M1-16DXP, IO-Link V1.1
– Port 7: Turck ultra sonic sensor, RU130U-M18E-..., IO-Link V1.1
– Port 8: Turck ultra sonic sensor, B2N360-Q42-..., IO-Link V1.1

Used Software

The following software tools are used in this example:

n

SIMATIC STEP7 Professional V15 (TIA-Portal)

n

GSDML file for TBEN-L…-8IOL (can be downloaded for free as ZIP archive "TBEN-
L_PROFINET.zip" under 

www.turck.com

)

Prerequisites

n

The programming software has been started.

n

A new project has been created.

n

The PLC has been added to the project.

Summary of Contents for TBEN-L 8IOL Series





















































































































































Reviews:

No comments