turck 6827380, Instructions For Use Manual

Page: 105 / 127

103
2020/09
Byte 3.4
TYP
ERR
Sx Device configuration, slave x
Info field for the individual indication of a configuration error as error message. If the TYP
INFO
A
parameter has been set for single diagnostics, this bit field indicates the error, as soon as the
ACTUAL configuration of the slave was not accepted and is therefore not enabled for data
exchange. The diagnostics LED of the slave flashes.
0 OK No configuration error is present and the slave is in data
exchange mode or diagnostics function has been deacti
-
vated via the parameter setting.
1 incorrect Configuration error present and the slave is NOT in data
exchange mode.
Byte 5.6
SD
ERR
Sx Communication, slave x
Info field for the individual indication of the release of the slave diagnostics as error message.
If the SD
INF
OA is set for single diagnostics, this bit field indicates the error as soon as the slave
diagnostic message of the slave Sx is triggered.
0 OK No error is present or diagnostics function has been deacti -
vated via the parameter setting.
1 Offline A diagnostics message is present.
Byte 7.8
PKZ
ERR
Sx Overcurrent protective circuit-breaker, slave x
Info field for the individual indication of the tripping a motor-protective circuit-breaker (PKZ)
as error message. If the PKZ
INFO
A is set for single diagnostics, this bit field indicates the error as
soon as the PKZ of the slave Sx has tripped.
0 OK The PKZ of the slave has not tripped or diagnostics function
has been deactivated via the parameter setting.
1 tripped The PKZ of the slave has tripped.
NOTE
The error messages U
AUXERR
, TYP
ERR
, TYP
ERR
Sx, PKZ
ERR
, PKZ
ERR
Sx, SD
ERR
and SD
ERR
Sx can be
deactivated by a respective parameterization.
Design. Value Meaning