turck 6827380, Instructions For Use Manual

Page: 63 / 127

61
2020/09

BL20-E-1SWIRE
The following table shows the meaning of the parameter bits:
Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
Byte 1 reserved free free MC MNA configu -
ration
Disable
Cfg free
Byte 2 free U
AUXERR
TYP
ERR
TYP
INFO
PKZ
ERR
PKZ
INFO
SD
ERR
SD
INFO
Byte 3
reserved
Byte 4 reserved (life guarding time until version VN 01-03)
Byte 5
SC
DIAG
S8 SC
DIAG
S7 SC
DIAG
S6 SC
DIAG
S5 SC
DIAG
S4 SC
DIAG
S3 SC
DIAG
S2 SC
DIAG
S1
Byte 6 SC
DIAG
S1
6
SC
DIAG
S1
5
SC
DIAG
S1
4
SC
DIAG
S1
3
SC
DIAG
S1
2
SC
DIAG
S1
1
SC
DIAG
S1
0
SC
DIAG
S9
Byte 7 reserved
Byte 8
reserved
Byte 9
- 24 Type designation slave 1 - 16
Parameter
name
Value
Byte 1
Disable Cfg If the physical structure of the SWIRE bus does not match the configuration stored in the BL20-
E-1SWIRE on power up (SW LED flashing), the physical structure of the SWIRE bus must be
stored in the BL20-E-1SWIRE.
0 = inactive Manual SWIRE configuration:
To store the physical structure of the SWIRE bus in the BL20-E-1SWIRE, the
CFG button of the BL20-E-1SWIRE must be pressed manually (only func
-
tions if the SW LED is flashing).
1 = active Automatic SWIRE configuration:
If the physical structure of the SWIRE bus does not match the configuration
stored in the BL20-E-1SWIRE on power up, the physical structure is stored
automatically in the BL20-E-1SWIRE.
configura -
tion
PLC configuration check
If the PLC configuration check is activated, the configuration stored in the BL20-E-1SWIRE is
compared with the SET configuration stored in the PLC.
0 = active
The configuration stored in BL20-E-1SWIRE is compared with the SET con -
figuration stored in the PLC. Only SWIRE slaves in the SWIRE bus are
accepted that have a device ID completely matching the SET configura
-
tion.
1 = inactive All slaves are mapped in 4 Bit INPUT/4 Bit OUTPUT without checking the
device ID.