Turbosol TB30, Use And Maintenance Manual

Page: 58 / 87

5
USE AND OPERATION
58/87
561405 - IS19/07 - EN
5.3 REMOTE CONTROL
The machine is equipped with a remote control via cable;
- Insert the plug 1 (FIG.4-16) in the connector's socket 2 (FIG.4-16) located on the machine's bodywork.
- Enable the remote control from the machine’s control board by means of stable selector 7 (FIG.5-1).
- Press START button 3 (FIG.4-16) to enable the functions of the remote control via cable.
- Place the selector at 4 (FIG.4-16) to enable pumping (stable command).
- Place the selector at 5 (FIG.4-16) to reverse pumping (stable command). The selector’s neutral position blocks pumping.
- Place selector 6 (FIG.4-16) at 1 to enable the vibrator, at 0 to disable it (stable command).
- Press button 7 (FIG.4-16) to make sound signals.
- Press button 8 (FIG.4-16) to stop the endothermic engine in emergency.
8
3
6
4
5
7
1
2