Turbosol TB30, Use And Maintenance Manual

Page: 11 / 87

GENERAL INFORMATION
1
561405 - IS19/07 - EN
11/87
1.4 WARRANTY LIMITS
Turbosol Produzione S.R.L. machines are covered by a warranty for a 12 (twelve) month period or 1000 hours of work -
whichever occurs first - starting from the delivery date of the machine to the Final user and, however, not beyond 18 (eighteen)
months from their shipment date. The machine's delivery date to the Final user must be reported on the warranty certificate that
must accompany all newly manufactured machines. The warranty is only valid if the manufacturing company receives the
warranty certificate card, duly completed and signed by the purchaser, within 30 days from the machine delivery date. The
warranty covers any manufacturing or material defects. The goods supplied by Turbosol Produzione S.R.L. but manufactured
by third parties are covered by the warranty granted by the latter to Turbosol and that is applied to the Final user. Only the
Manufacturing Company and the Organisations expressly authorised by it can intervene in the event of faults during the
warranty period. The faulty pieces must be sent to the Manufacturing Company ex works, which commits to gratuitously repair
or replace those parts that, at its indisputable judgement, show quality defects. The faulty pieces must be sent to the
Manufacturing Company ex works, which commits to gratuitously repair or replace those parts that, at its indisputable
judgement, show quality defects. The replaced parts remain the manufacturer's property. The purchaser is responsible for the
material shipment expenses and those relating to servicing by the Manufacturing Company's personnel, if required. The repair
or replacement supply will not extend or renew the overall warranty period. Parts subject to normal wear or inducible
deterioration are excluded from the warranty, such as: valves seats and rubber ball valves, pistons and jackets, rubber stators
and screws, bushes, flaps, mixing blades, tanks protection armour, wear cones and plates, filters, etc. The purchaser loses the
right to the warranty if the payment conditions are not respected, even only once, should the declared faults be caused: by the
actions of the Purchaser, its employees or third parties, when the defect depends on bad use, incorrect installation, improper
use or use that is not compliant with the instructions in the use and maintenance manuals received with the machine. The
warranty becomes void if the injection systems are damaged by unsuitable or polluted fuel, in the event of faulty electrical
systems due to unsuitable power supply or components like relays, condensers, remote switches, remote controls, etc.: only
the supplier warranty applies to these. The warranty also becomes void due to arbitrary tampering, use of non-original spare
parts or rubber hoses different to those supplied by the Manufacturing Company. The Manufacturing Company is not
responsible for any damage caused by the impossibility of using the product or damage due to work interruption or, direct or
indirect, profit losses for damages also caused by the removal of casings or protection carters from the moving parts and safety
mechanisms. Flaws and defects must be reported in writing to the manufacturer within the legal terms. Refer to the original text
in Italian in the event of disputed interpretation of the above clauses.
1.5 SPARE PARTS AND DUPLICATES OF DOCUMENTS
The request for spare parts must be submitted to the Dealer or directly to TURBOSOL PRODUZIONE S.R.L., always indicating:
- the identification date of the machine shown on the factory plate: type of machine, serial number, year of manufacture;
- component code and description, found on the S.P.C.;
- the required quantity.
When requesting spare parts of components not manufactured by TURBOSOL PRODUZIONE S.R.L., provide the data on the
relative rating plates.
Repairs, maintenance and replacements of components not compliant with that indicated in this Manual
and/or performed by untrained/unauthorised personnel exclude the owner from any warranty claim and
relieve the Manufacturer from all liability for malfunctioning of the machine and any resulting
consequences.
The request for duplicates of the documentation accompanying the machine must be submitted to TURBOSOL PRODUZIONE
S.R.L., always indicating:
- the identification date of the machine shown on the factory plate: type of machine, serial number, year of manufacture;
- reason of the request.