Turbosol TB30, Use And Maintenance Manual

Page: 19 / 87

MACHINE PRESENTATION
2
561405 - IS19/07 - EN
19/87
2.5 APPLICATION EXAMPLES
The machine is designed for transporting and pumping concrete (mixture of inert materials such as sand and gravel, binder
such as cement, water in well defined proportions.
The machine is able to pump the concrete if the mixture components are in such proportions to ensure smoothness along the
pipe without creating segregations that clog the ducts.
Other types of product that you wish to treat with the machine, can cause damage to corrosion, temperature, etc. Therefore,
contact the manufacturer’s technical service.
Product technical data
1.Concrete in general, grout, mixtures for micropiles.
2.Grout spraying (shotcrete) for tunnels, slopes, embankments, swimming pools, channels consolidation and coverings.
All pumpable concrete can be strengthened with flexible or stiff fibres of adequate dimensions and features and sprayed with
setting accelerator.
To avoid problems during pumping:
1.the inert's maximum diameter must be between 1/3 and 1/4 of the pipe's diameter,
2.the grading envelope (granulometric curve) of the mix must be suitable for pumping,
2.6 OPTIONALS
- Elastic axle for road tow with brakes and lights bar
- Hydraulic activation water pump 40 l/m - 20 bar
- 3-function radio control
- Accessories and pipes D=125, 100, 75, 65, 50
- Spritzbeton nozzles
- Setting accelerator dose pump synchronised with pumping
- Compressor