Turbosol TB30, Use And Maintenance Manual

Page: 63 / 87

USE AND OPERATION
5
561405 - IS19/07 - EN
63/87
Only use clean water and observe the limits of use indicated in § 2.1.
Do not use the high pressure washer without water supply.
Do not use damaged pipes or water guns.
Do not point the water gun towards yourself, other people, animals or objects.
The fittings must be properly tightened.
Do not use the high pressure washer in case it has suffered strong impacts, there are evident oil leaks or
water leaks. In this case the high pressure washer must be checked by an authorised maintenance
technician.
Ensure there is no ice inside the pump if using at extremely low temperatures.
The inner diameter of the suction pipes must not be smaller than the suction fitting Fig. 5-4 and must have a
rated pressure of less than 10 bar.
Firmly grasp the water gun and pay attention to the reaction force of the water jet.
Do not direct the jet towards materials containing health damaging substances.
Do not modify or tamper with the high pressure washer.
Prevent the crushing or damaging of suction and delivery pipes.
The high pressure washer fears frost. Always drain the residual water from the system.
Perform the checks provided by the routine maintenance; contact a qualified technician for extraordinary
maintenance.