Turbosol TB30, Use And Maintenance Manual

Page: 27 / 87

SAFETY AND PREVENTION
3
561405 - IS19/07 - EN
27/87
3.5.3 Placement
3.5.3.1 Residue risks
The placement operations always involve a residual risk especially due to abrasion, impacts and/or crushing.
Use the drawbar to correctly position the machine.
Stabilise the machine by positioning the parking wedges on the wheels and lower the outrigger feet to the
ground.
No one, except the personnel appointed by the user, should be within the action range of the moving
machine during placement.
3.5.3.2
Additional warnings
Inspect the work place to verify its suitability before positioning the machine.
The work place must comply with the accident-prevention regulations in the country of use.
Observe the safety distances from the boundaries of the worksite or from uneven ground.
Observe the safety distances from the live parts of power lines.
Position the machine on a levelled surface and consistent ground.
The machine cannot be used in environments where there are potentially explosive atmospheres classified
as area 0 or area 1 or area 2.
The machine cannot be used in environments where there are ionising and non-ionising radiations: e.g.
microwaves, UV rays, laser, X-rays and similar.
The machine can only operate outdoors. Do not use the machine indoors. Make sure there is always good
ventilation.
3.5.3.3
P.P.E. to be used