background image

 25   TurboLock TL88    

refurbished parts that are equivalent to new in performance and reliability; or (2) exchange the Product with a product that is new or 

refurbished which is substantially equivalent to the original product. This Warranty is for one replacement only of like-items and does 
not cover items out of production if the product is no longer made or stocked.  This Warranty is not assignable or transferable. The 
original purchaser may call the toll-free number at 1-855-850-8031 for service requests.

When a product or part is exchanged, any replacement item becomes your property and the replaced item becomes WP’s property. 

This warranty only covers technical hardware defectiveness during the warranty period and under normal use conditions. WP does 
not warrant uninterrupted or error-free operation of this Product. 
This Warranty does not cover any damage due to: (a) transportation; (b) storage; (c) improper use; (d) failure to follow the product 

instructions or to perform any preventive maintenance; (e) modifications; (f) unauthorized repair; (g) normal wear and tear; or (h) 
external causes such as accidents, abuse, or other actions or events beyond our reasonable control. 

Important:

 Do not disassemble the Product. Disassembling the Product will void this Warranty. Only WP or a party expressly 

authorized by WP should perform service on this Product.
DISCLAIMER OF WARRANTY:  THE REMEDIES DESCRIBED ABOVE ARE YOUR SOLE AND EXCLUSIVE REMEDIES 
AND OUR ENTIRE LIABILITY FOR ANY BREACH OF THIS LIMITED WARRANTY. OUR LIABILITY SHALL UNDER NO 
CIRCUMSTANCES EXCEED THE ACTUAL AMOUNT PAID BY YOU FOR THE DEFECTIVE PRODUCT, NOR SHALL WE UNDER 
ANY CIRCUMSTANCES BE LIABLE FOR ANY CONSEQUENTIAL, INCIDENTAL, SPECIAL OR PUNITIVE DAMAGES OR 
LOSSES, WHETHER DIRECT OR INDIRECT.
SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO 
THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. 
THE DURATION AND REMEDIES OF ALL IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION THE WARRANTIES OF 
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED TO THE DURATION OF THIS EXPRESS 

LIMITED WARRANTY.

Summary of Contents for TL88






























Reviews: