15 TurboLock TL88
Section 6
Using The Fingerprint To Open The Lock
To use your fingerprint to open the lock, you must first pair the TL88 with your smartphone via the Turbolock app. After pairing
successfully, only authorized fingerprints can be used to open the lock. Until the lock is paired, there is no way to lock the TL88. To
avoid security risks, pair the TL88 with the app immediately and set up authorized fingerprints (see Section 7.2 Pairing).
Press an authorized fingerprint on the lock’s fingerprint reader for approx. 2 seconds. The lock will beep twice and the LED indicator
will flash green once the fingerprint is recognized and the lock is engaged. If the fingerprint cannot be recognized, the TL88 will beep
twice and the LED indicator light will flash red.
The TL88 will beep twice and the LED indicator light will flash red if an unauthorized fingerprint is used. If a fingerprint cannot be
identified after 20 consecutive attempts, the TL88 will enter a
Security Lock-Out Mode
for 5 minutes. During this time, the
fingerprint reader will be temporarily disabled, and the indicator will flash yellow when you try again to use fingerprint to open
the lock. The only way to unlock the TL88 during
Security Lock-Out Mode
is with the app.