manualshive.com logo in svg

Turbolock TL88, Manual, Page: 12 / 29

Share
Download
Turbolock TL88 Manual Download Page 12

 9

   TurboLock TL88    

Section 4

Installation (New)

This section details installation steps needed if you are installing the TL88 on a door without a cutout. If you are using 

the TL88 to replace an old lock or if your door otherwise already has a cutout, please go back to Section 3.

• For easier installation, have another person help.
• For your convenience, installation instructions are broken into segments. Read and follow the instructions for both Pre-

Installation and Main Installation.

4.1  Pre-Installation

Part 1  Making the Opening
Step 1. 

Using the provided template, mark the locations for the centers of the backset and the 

latch hole.

Step 2. 

Bore a 54mm (about 2” or 2 1/8”) hole on door face, then drill a 25mm (about 1”) hole 

into the edge of the door so that it intersects with the larger hole.

 

• When drilling the 54mm (about 2” or 2 1/8”) hole, it’s recommended to drill from both sides of 

door to stop the wood from splintering.

• It may be easier to drill the 54mm hole with a hole saw bit (not included).
• It may be easier to drill the 25mm hole with a hole saw bit (not included) or a 7/8” spade bit 

(not included). If using a spade bit, do not drill at high speeds as this may tear out extra wood 

and damage the door.

2” diameter hole

1” diameter hole

Summary of Contents for TL88






























Reviews:

No comments