Tuchel Snow blade SF, Operating Manual

Page: 47 / 59

Cleaning, servicing and maintenance
Page
6-1
6 Cleaning, servicing and maintenance
Pay attention to the notes in the chapters below on cleaning, servicing
and maintenance:
•
"Operator obligations", on pages 2-3,
•
"Personnel qualifications", on pages 2-4,
•
"Basic safety notes", on pages 2-7,
•
"Warning notes and instructions", on pages 2-15.
Observing these chapters is for your own safety.
WARNING Risk of crushing, shearing, cutting, severing, grabbing,
entanglement, pulling in, catching and collisions for persons, if:
•
the raised, unsecured attachment is lowered or lowers
inadvertently,
•
the machine and attachment start up and roll away
inadvertently!
•
Safeguard the raised attachment against unintentional lowering
before working in the area around it.
•
Safeguard the machine and attachment against unintentional
start-up and rolling away before cleaning, servicing or
maintaining the attachment while it is attached to the machine,
see chapter "Safeguard machine and attachment against
unintentional start-up and rolling away", page 5-2.
•
Wait until the attachment is at a standstill before entering the
hazard area of the attachment.
WARNING
Risk of crushing, shearing, cutting, severing, grabbing,
entanglement, pulling in and catching for persons if hazardous
areas are unprotected!
•
Fit the safety equipment which has been removed for cleaning,
servicing and maintaining the attachment.
•
Replace defective safety equipment with new safety equipment.
WARNING Dangerous situations may occur if load-bearing parts break due
to mechanical work on the frames!
It is strictly forbidden to:
•
drill into the frame or chassis,
•
drill open existing holes on the frame or chassis,
•
perform welding on load-bearing parts.