Coupling and uncoupling of the attachment
Page
4-6
•
Select bolt diameter (5) or (6) on the draft link hook
according to the attachment category of the carrier
vehicle:
•
Hook and lock the draft link hook rods.
•
Use bolts (7) on the upper hook according to the
attachment category and lock with the spring plug.
Adjust the upper hook so that the
attachment receptacle is vertical (90°) to
the ground
Verify the correct seating of the
attachment receptacle.
.
Fig.4.10
•
Lift out the attached SF snow blade. Pull out the
spring plug (8) and adjustment bolt (9). Pull the
support (10) upward and secure.
•
If present, connect hydraulic hoses and electrical
connection line to the carrier vehicle.
•
Raise the SF snow blade and carry out a
functionality check.
.
Fig.4.11
ATTENTION
NOTE
Summary of Contents for Snow blade SF
