Coupling and uncoupling of the attachment
Page
4-7
4.2.4
Front attachment - coupling triangle
•
Observe attachment safety notes listed in chapter 4.2!
•
Check the device triangle on the carrier vehicle and on the snow
blade for soiling and clean if necessary.
•
Check the attachment heights of the device triangles before
attaching.
•
Height adjustment by means of roller guide for the device triangle
with support roll carrier, see TD03345! (No conversion necessary)
Height adjustment by means of screw
connection for the device triangle with
fixed attachment and level compensation,
see TD03341! (Conversion necessary)
.
Fig.4.12
•
Height adjustment by moving the bars (1) with screw
connections (2) and (3).
Replace self-locking nuts each time they
are unscrewed.
•
Insert the receptacle triangle into the device triangle
and lock it.
Adjust the locking tongue of the 3-point
receptacle on the device triangle of the
SF snow blade for wear and tear (see
TD03344)
.
Fig.4.13
NOTE
ATTENTION
NOTE
Summary of Contents for Snow blade SF
