Tuchel Snow blade SF, Operating Manual

Page: 37 / 59

Coupling and uncoupling of the attachment
Page
4-9
4.3 Operation
Contour lights on snow blade required in accordance with StVZO §
53b, if:
•
snow blade projects 400 mm sideways beyond the outer
edge of the carrier vehicle's contour illumination;
•
the outer edge projects more than 1000 mm beyond the
rear lights of the vehicle.
•
-If the snow blade covers even just part of the headlights,
additional headlights must be mounted that adequately
illuminate the roadway while in the transport and working
position (see also StVZO §50 paragraph 2).
4.4 Transport trips
The safety instructions from Chapter 4.2.
Transport trips may only be performed with the SF snow blade in the
straight position.
(For information on side adjustment, see chapter 4.5.1)
Conversion is necessary when attaching
with level compensation.
•
Pull the spring bar (1) outward and swivel the transport
lock (2) downward until the spring bar audibly
engages.
•
The swivel console (3) is now secured by the transport
lock (2).
. Fig.4.16
ATTENTION