Coupling and uncoupling of the attachment
Page
4-3
•
Drive the carrier vehicle to within 300 mm of
the snow blade.
•
Lower the receptacle bolt of the carrier
vehicle until below the receptacle openings
(1).
•
Approach with the carrier vehicle and raise
the lifting gear.
•
Insert the locking bolts of the carrier vehicle
into the holes (2) and lock.
.
Fig.4.2
Check the receptacle bolts and
the locking bolts for proper seating.
•
Lift out the attached SF snow blade.
•
Pull out the spring plug (3) and adjustment
bolt (4). Move the support (5) upward and
resecure.
•
If present, connect hydraulic hoses and
electrical connection line to the carrier
vehicle.
•
Raise the SF snow blade and carry out a
functionality check.
.
Fig.4.3
4.2.2
Fork arm receptacle
•
Observe attachment safety notes listed in chapter 4.2!
•
Check fork arm receptacle and arms for soiling and clean
if necessary.
•
The distance between the fork arms must be adjusted on
the carrier vehicle before they are driven into the
receptacles!
ATTENTION
Summary of Contents for Snow blade SF
