Coupling and uncoupling of the attachment
Page
4-1
4
Coupling and uncoupling of the attachment
•
Also observe chapter "basic safety notes" page 2-7, for coupling
and uncoupling.
•
Check the attachment for obvious defects when coupling and
uncoupling. Pay attention to the "Operator obligations" chapter,
page 2-3 when doing this.
WARNING
Risk of crushing and collisions for persons within the lifting
range of the 3-point hydraulics of the machine when coupling
and uncoupling the attachment!
Operate the control levers for the 3-point hydraulics of the machine:
•
only from the intended workplace,
•
never, if there are persons in the hazard area between the
machine and the attachment,
•
never, if you are in the hazard area between the machine and
the attachment.
WARNING
Risk of crushing and collisions for persons can occur if the
machine and the attachment inadvertently start up and roll off
when coupling and uncoupling the attachment!
Safeguard the machine and the attachment from unintentional
starting and rolling off before entering the hazard area between the
machine and the attachment for coupling or uncoupling, see page 5-
2.
4.1
Initial attachment
ATTENTION
During the initial attachment of the snow blade
with illumination system, the cabinet is to be
mounted at a suitable position in the carrier
vehicle.
Connect cable (3) to the battery (-) and cable (4)
to the parking light terminal.
Socket for illumination system (5), fuse (1), OFF
- ON switch (2).
Fig. 4.1
Summary of Contents for Snow blade SF
