![Tubeline TL60ECV Operator'S Manual Download Page 32](http://html1.mh-extra.com/html/tubeline/tl60ecv/tl60ecv_operators-manual_1179180032.webp)
TL60ECV
-
Section 7: Operation 7-3
Ending Bale Row
1. Switch balewrapper control screen to manual
.
2. Move bale ram return limit switch to end of slot.
3. Lift last bale to height necessary to place end
cap on side facing front of bale wrapper.
NOTE:
If placing last bale on wrapper with forked
implement tape puncture holes to avoid bale spoil.
4. Place last bale on bale deck and manually push
and wrap bale. See
Fig .1 .
5. Stop the ram and wrap several more layers on
the end of the bale.
6.
Cut plastic film by pressing and holding the film
snap while rotating the hoop. See
Fig.2.
7. Push last bale to end of bale ram stroke.
8. Return bale ram to front home position.
9. Move linchpins from ram push plate hooks to
storage position on ram. See
Fig .3 .
10.
Extend the final bale pushoff by pivoting the
handle under the ram to the opposite side of the
machine. See
Fig .4 & 5
.
Fig .1
Fig .3
Fig .4
Fig .2
Summary of Contents for TL60ECV
