20-2
Section 20: Option - Laser Guidance System -
TL60ECV
Laser Guidance Adjustment
1. The mirrored face of the sensor must be
pointing towards the row you want the wrapper
to follow. The sensor can be repositioned as
needed by pulling down on the sensor, then
pivoting it in the correct position. See
Fig.1
.
2. Release the sensor. The machine screw
heads holding the sensor to its mounting plate
should fit neatly into the pivot plate to lock the
necessary position in place.
3. After setting the laser eye to the desired
direction go to the control panel screen Setup
page,
Fig.2
, and set “Laser Steering” text box
to match direction of laser eye.
4. Change value of Setup screen “Target Laser
Distance [in]” text box to desired distance
to guiding bale row. These can be set in
increments of 4”, starting at 38”.
NOTE:
The home screen sections, shown in
Fig.3
, “Laser Steering” and “Actual Distance” are
informative only.
Fig .2
Fig .3
Fig .1
Summary of Contents for TL60ECV
