Tubeline TL60ECV, Operator'S Manual

Page: 26 / 64

4
3
2
1
1
2
3
4 5
6
7
8
TL60ECV - Section 6: Control Screen Operation 6-1
Section 6: Control Screen Operation
After the machine is started (see
Balewrapper Starting
,
pg.7-1
) and the control panel screen is
on you should see either a manual or automatic screen. The following screens show the different
functions of the TL60ECV.
NOTE: Functionality will vary with different optional features.
NOTE: Illustrations may vary slightly from actual screens.
General Button Functions
Auto Wrap Mode Screen Functions
1. Mode Button - Press to return to activated mode screen.
2. Back Button - Press to return to previous screen.
3. Next Button - Press once for Setup screen, twice for Information screen,
and three times for Parameters screen.
4. Selector Knob - Turn to move to different selection, press to select a box
for edit. Rotate knob to modify value of selected box. Press again to set
value and deselect box.
1. Wrap Mode Function - Press to switch to Manual Wrap mode.
2. Auto Wrap Enable Button - Press to enable the Bale Trigger after entering Auto Wrap Mode. If
cycle has been stopped before completion, press again to resume the Auto Wrap cycle.
3. Wrap Cycle Pause Button - Press to pause an in-progress Auto Wrap cycle.
4. Roller Bed Up - Press and hold to raise rear roller bed to full height.
5. Roller Bed Down Button - Press and hold to lower rear roller bed to ground.
6. Laser Clearance Status - Displays actual distance from guiding bale row with laser guidance
option. See
Section 20
.
7. Laser Steering Status - Displays direction of optional laser guided steering. See
Section 20
.
8. Brake Button - Not applicable with model TL60ECV.