E479EN_07.DOC
Tool
assembly
9
3. Tool
assembly
Caution
Support plate and dial ring become hot!
Danger of burns
¾
When configuring the chamfer height wear protective gloves.
3.1 Setting chamfer height
1
2
3
1 Clamping
lever
2 Dial
ring
3 Support
plate
Setting chamfer height
The chamfer height is set with the aid of the support plate and can
be read off the numeric scale on the dial ring.
1. Loosen clamping lever (1).
2. Rotate support plate (3) until desired chamfer height can be
read at the dial ring (2). Chamfer height is calculated as
follows:
(Value on dial scale) + (value on dial ring) = chamfer height.
Example: 1.5 + 0.7 = 2.2
3. Retighten the clamping lever (1).
Chamfer height is set.
Fig. 30592
