12
Tool assembly
E479EN_07.DOC
3.3 Use radius tool and multi-edge cutters
as a tool
When deburring or chamfering with radius the multi-edge cutter
mount R is inserted completely. The integrated multi-edge cutter
mount consists of the multi-edge cutter mount R, the multi-edge
cutters and the impeller R.
The multi-edge cutters, the actual tools as radius tools, are:
•
useable for processing steel, aluminum and aluminum alloys
as well as plastic material.
•
suitable for processing bevels with radius R2 or R3.
There is an appropriate multi-edge cutter for each material:
Tensile strength of
the workpiece
Radius
Multi-edge
cutter
Chamfer height
[mm]
Steel up to 400 N/mm² R2
St R2
1.1
Steel up to 400 N/mm² R3
St R3
1.7
Steel up to 600 N/mm² R2
Cr R2
1.1
Steel up to 800 N/mm² R2
Cr R2
1.1
Aluminum/aluminum
alloy²
R2
Cr R2
1.1
Steel up to 600 N/mm² R2
Cr R2
1.1
Plastic material (PA6) R2
Cr R2
1.1
Multi-edge cutter and setting dim.
Note
The values for chamfer height are guidance values which may
differ from the stated values.
Note
Before processing steel and aluminum or aluminum alloys it is
recommended to oil the cutting edges with cutting oil to achieve
edges that can be better processed and a higher tool service life.
Multi-edge cutter and
Einstellmaß
Tab. 5
