14
Operating instructions
E479EN_07.DOC
4.1 Working with chamfering and
deburring tool
2
1
3
1 Speed
controller
2 Motor
3 On/off
switch
1. Set the speed controller (1) (230 V) to the highest level
(= level G).
2. Push the On/off switch (3) on the motor (2) and press the
switch down till it catches
.
Motor runs.
2. Set the speed controller (1) (230 V) to the highest level
(= level G).
1. Only move the machine towards the workpiece when full speed
has been reached.
2. Processing
material.
When deburring or chamfering the device must always be
moved
from left to right
(up-milling).
Switch on chamfering and
deburring tool
Fig. 30594
Working with chamfering and
deburring tool
