E479EN_07.DOC
Operating
instructions
13
4. Operating
instructions
Caution
Damage to property due to an oversupply of power!
Damage to the motor
¾
Check the power supply. The power supply must correspond
to the information on the machine type plate.
Caution
Damage to property due to blunt tools!
Overloading of the appliance.
¾
Check tools regularly for wear. Sharp multi-edge cutters
ensure high quality cutting and protect the device. Rotate or
replace multi-edge cutters in good time.
Caution
Danger of injury due to incorrect handling!
¾
When working with the machine, always ensure that it has a
secure base.
¾
Never touch the tool while the machine is running.
¾
Always guide the machine away from the body when
operating.
¾
Do not work above your head with the appliance.
The appliance may switch off prematurely when affected by
electromagnetic faults. The appliance will continue to operate when
the faults have been cleared.
When the motor temperature is too high the motor switches off.
¾
Let the unit run idle until it has cooled down.
After cooling the unit can be operated again as normal.
Electromagnetic faults
Overload protection motor
