Trox Technik X-CUBE compact, Transport And Installation Manual

Page: 10 / 144

3 Transport and storage
3.1 Delivery of the air handling unit
3.1.1 Complete and partial units
Upon delivery, check the air handling unit for transport
damage and completeness, Ä Chapter 3.2 ‘Delivery
check’ on page 10 .
Depending on its size, the air handling unit is shipped
either fully assembled or in parts, with the individual
components or casing units screw-fixed to square edge
timber frames or disposable pallets. The number of
parts is shown on a drawing on the package.
External components may be shipped unassembled
to protect them from getting entangled with lifting
eyes while being moved. Components for outdoor
installation have to be assembled, mounted and
sealed by others.
3.1.2 Symbols on the packaging
Lashing points are marked on the packaging. Be sure to
follow them when you are moving the unit.
The packaging may also carry other symbols, notes,
and information. Be sure to take notice of them.
Lashing point
Fig. 3: Lashing point
Always use a central lashing point for lifting and moving
the air handling unit to ensure that it remains stable and
cannot tip, slip, swing or fall unintentionally.
3.2 Delivery check
Sharp edges, sharp corners and thin sheet metal
parts
CAUTION!
Danger of injury from sharp edges, sharp cor-
ners and thin sheet metal parts!
Sharp edges, sharp corners and thin sheet metal
parts of the heat exchanger or of the cooling or
heating coil may cause cuts or grazes.
– Be careful when working on these components.
– Wear protective gloves, safety shoes and a hard
hat.
Check delivered items immediately after arrival for
transport damage and completeness. In case of any
damage or an incomplete shipment, contact the ship-
ping company and your supplier immediately. If any
parts are missing, have the driver confirm them on the
consignment note.
Otherwise the manufacturer will not accept any liability.
See the notes on shipping damage on the packaging
or in the shipping papers.
For any claims it is necessary that you follow the proce-
dure below. In each of the following cases do contact
TROX before you start installing a unit.
The packaging has been damaged

Unpack the goods in the presence of the person
who has delivered the goods and have them confirm
the damage on the shipping order.

Photograph the damage.

Report the damage to TROX immediately.
No external damage to packaging, contents dam-
aged.

Photograph the damage.

Report the damage to TROX immediately in writing.

Note that shipping damage must be reported within
four days of delivery.
Transport and storage
Delivery check
Air handling unit X-CUBE compact 10