Trox Technik X-CUBE compact, Transport And Installation Manual

Page: 14 / 144

Moving units for indoor installation with a crane and
lifting eyes/eye nuts and ropes/chains
Without a spreader beam
Personnel:

Crane driver
Protective equipment:

Industrial safety helmet

Protective clothing

Hearing protection

Safety shoes

Protective gloves
WARNING!
Danger of death from the fall of AHU casing
units.
If you overload lashing points or lifting gear, the load
may fall down. You or others could be killed.
– Use lifting eyes only to move AHU casings for
indoor installation, and only for casing units up to
a maximum weight of 1500 kg.
Fig. 7: Moving units with a crane and lifting eyes or eye
nuts (without a spreader beam)
1. Remove the covers from the threaded holes in the
top corners of the AHU casing unit.
2. Insert all lifting eyes or eye nuts (Fig. 7/2) com-
pletely into the threaded holes.
3. Hook the slings (Fig. 7/1) into the lifting eyes or
eye nuts.
We recommend using a chain hoist and
spreader beam if there are six or more lashing
points.
4. Maintain an angle greater than 45° between the
rope or chain and the top of the unit.
5. Do not spread slings by more than 60°.
6. Ensure that the slings cannot damage the AHU
casing unit.
7. Suspend (distribute) the load symmetrically, i.e. in
such a way that its centre of gravity is beneath the
crane hook.
8. Slowly lift the load and start moving.
Transport and storage
Moving packages > Moving packages with a crane
Air handling unit X-CUBE compact 14